FLY TRAP

To build a fly trap, you will need the following items;

One two liter plastic soda bottle
Some string, a match stick and bait

Cut the soda bottle along the top edge of the label. Cut four legs into the bottom of the top part. The bottom will be the dome for the trap. The bottle bottom will set right on the top of the bottle, as shown it the drawing. The legs you cut in the top will keep it up off of the table, so the flies can get under it. Drill a small hole in the bottom of the bottle and hang a piece of meat in side for bait. The meat should be 1/4" square and 1" long. I've found that raw bacon works very good. Set the trap on the table and that's all there is to it....until it needs emptied.